FiTech Go EFI 4 installed in a 1981 (to 1978 conversion) Trans Am was a success. Please follow the post completely for details of the process. The results I’ve only put 120 miles on the FiTech so far, but I have to say it’s worth every penny. I’m a geek (I write software for a […]
Author: angelo
If you’ve been following project Trans Am, then you may recall that I had to replace the Pertronix Flamethrower distributor because it was acting whacky. I was temporarily running a Cardone distributor with light springs in order to get by for the winter. I maybe drove the car 100 miles with this temporary distributor, but […]
This early summer I got a few things tidied up with the Trans Am. Gauge cluster repaired, replaced headlight switch, back to white lights Three things that have been driving me crazy, that my factory tachometer doesn’t work, the odometer portion of my speedometer was not recording anything, and the red LED lighting is not as bright […]
Categories
Project Trans Am November 2014 – April 2015
Sorry for the long hiatus. I did not work on the Trans Am over the 2014 winter.
From June up through October, I’ve been working on the Trans Am off and on with a couple roller coaster problems. First, some pictures now she’s driving under her own power! Now lets re-hash the summer… Upper Radiator Hose and Radiator When I first got the motor in the car and I was taking the […]
I did not do much in April with the Trans Am. I did however send out my front and rear bumpers to a buddy to get painted, which leads us into May… Motor Is In! I picked up the Motor from DCI Motorsports at the beginning of the month. Don had it on the engine […]
I got my YearOne Cast Snowflake 17″ wheels this week! They look great! They package the wheels very well. They ship 2 wheels per box, with packing paper in the top and bottom of each box. Each wheel is packaged in a retail box with special elastic padded rings around each wheel. The front has […]
To convert my 81 Trans Am to a 78, both the front and rear bumpers and lights need to be swapped. The front bumper, headlights and grills are quite easy to swap, simply unbolt the front bumper, brackets and hardware and bolt-on a 77/78 front bumper and hardware. Specifically, the metal bumpers, foam inserts, front […]
If you haven’t followed this blog, for Project Trans Am I decided on the Pypes brand header back X exhaust system. One of the finishing touches is to add dual chrome exhaust tips. This dual tip look was used from 1967-1969 and from 1976-1981. It is one of the subtle but unique details for any […]
Project Trans Am has been on hold over the Winter while I work on the house. This March the weather broke enough to get back to it! Ram Air Manifolds! I purchased a set of exhaust Ram Air manifolds from Ram Air Restorations in February. I’ve had my eyes on these manifolds for a couple […]